Fluke 374 - Measurement Procedures

374/375/376
Calibration Manual
8
Mechanical Specifications
Size (L x W x H) .....................................246 mm x 83 m x 43 mm
Weight.....................................................388 g
Jaw Opening...........................................34 mm
Flexible Current Probe Diameter ............ 7.5 mm
Flexible Current Probe Cable Length
(head to electronics connector) ..............1.8 m
Environmental Specifications
Operating Temperature........................... -10 °C – +50 °C
Storage Temp .........................................-40 °C – +60 °C
Operating Humidity .................................Non condensing (< 10 °C)
≤ 90 % RH (at 10 °C – 30 °C)
≤ 75 % RH (at 30 °C – 40 °C)
≤ 45 % RH (at 40 °C – 50 °C)
Operating Altitude ...................................3000 meters
Storage Altitude ...................................... 12,000 meters
EMC........................................................EN 61326-1:2006
Temperature Coefficients........................Add 0.1 x specified accuracy for each degree C above
28 °C or below 18 °C
Safety Specifications
Safety Compliance.................................. CAN/CSA-C22.2 No. 61010-1-04
ANSI/UL 61010-1:2004
ANSI/ISA-61010-1 (82.02.01):2004
EN/IEC 61010-1:2001 to
1000V Measurement Category (CAT) III
600V Measurement Category (CAT) IV
Pollution Degree 2
EN/IEC 61010-2-032:2002
EN/IEC 61010-031:2002+A1:2008
P
Agency Approvals...................................
), ;, ®
Batteries..................................................2 AA, NEDA 15A, IEC LR6