377/377 FC/378/378 FC
Users Manual
18
Data Logging (377 FC/378 FC)
Fluke Connect™ enables you to log the data measurements. The
Fluke Connect app shows measurements from the connected
Clamp on your smartphone or tablet display. The app also saves
the measurements to Fluke Connect Cloud™ storage and shares
the information with your team.
Note
The logging interval is set in the Fluke Connect app.
Logging is not available for the inrush and line-to-line
measurement modes.
To log measurements:
1. On the Clamp, push
I for >2 s.
The memory icon indicates how much memory is available.
2. On the Clamp, push
I for >2 s to stop logging.
Clear Memory (377 FC/378 FC)
See Power-On Options.
Firmware Update (377 FC/378 FC)
Firmware updates are available for Clamps that have the Fluke
Connect™ feature.
To update:
1. ?
2. ?
Firmware Version
To find the firmware version for the Clamp:
1. Turn off the Clamp.
2. Push and hold
e as you turn the control knob to V.
The Clamp goes into maintenance mode, turns on all the LCD
segments, and turns off the backlight.
3. Push
e again to show the firmware version number on the
display.
4. Turn the control knob to OFF to exit the maintenance mode.
To Next Page
Loading...
