To Next PageTo Next Page
Need help?Do you have a question about the Fluke 424D and is the answer not in the manual?
General| Carrying case | Yes |
|---|---|
| Type | Laser distance meter |
| Display type | Digital |
| Certification | IEC Standard No. 61010-1:2001 EN60825-1:2007 (Class II) EN 55022:2010 EN 61000-4-3:2010 EN 61000-4-8:2010 |
| Product color | Grey, Yellow |
| Display technology | LCD |
| Pythagoras functions | 1+2 |
| Display number of lines | 4 lines |
| Distance measuring units | ft, m |
| Number of memory records | 5 |
| International Protection (IP) code | IP54 |
| Accuracy | 2 mm |
| Wavelength | 635 nm |
| Laser class | 2 |
| Sensor tilt angle | 360 ° |
| Laser beam diameter (max) | 60 mm |
| Laser beam diameter (min) | 6 mm |
| Storage temperature (T-T) | -25 - 70 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Maximum measurement distance | 100 m |
| Operating relative humidity (H-H) | 0 - 85 % |
| Battery type | AAA |
| Battery voltage | 1.5 V |
| Auto power off after | 3 min |
| Battery life (measurements) | 5000 |
Weight and Dimensions| Depth | 33 mm |
|---|---|
| Width | 56 mm |
| Height | 127 mm |
| Weight | 158 g |
Overview of Fluke 414D/419D/424D Laser Distance Meters, their capabilities, and advantages.
Provides telephone numbers and website links for technical support, calibration, and manual downloads.
Details crucial safety precautions, warnings, and cautions for using the laser distance meter.
Information regarding the product's compliance with electromagnetic compatibility standards.
Details the FCC regulations and limits for Class B digital devices and potential interference.
Provides specific safety instructions for Class 2 laser products, including avoiding direct eye exposure.
Compares the features available across the 414D, 419D, and 424D models.
Instructions on how to install and replace batteries, including notes on battery types and caution for corrosion.
Explains how to use the endpiece for various measurement situations from edges and corners.
Illustrates and describes the function of each button on the 414D, 419D, and 424D keypads.
Details the various symbols and information displayed on the meter screen for different functions.
Explains how to use specific buttons for On/Off, basic measurements, and model-specific functions.
Instructions on how to change and select different units for distance measurements.
Details how to use the timer, beeper, backlight, and keypad lock functions on specific models.
Explains how to use the compass for direction finding and provides usage tips.
Step-by-step guide for automatic and manual calibration of the compass sensor.
Instructions on how to set the magnetic declination for accurate directional measurements.
Instructions for using the meter with a tripod, including setting the reference point.
Explains how to change the measurement reference point (front or end) on the meter.
Step-by-step guide to measure the distance to a target using the laser.
Explains how to use the tracking function to find minimum and maximum distances.
Instructions for adding or subtracting measurements to calculate combined values.
Steps for measuring the area of a space using two distance measurements.
Instructions for measuring volume using three distance measurements.
Calculates angles in a triangle using three distance measurements for corners.
Information on sensing and measuring tilt angles with the 424D model.
How to find horizontal distance when the line-of-sight is obstructed.
Guide to tracking height measurements on a tripod for the 424D model.
Instructions on how to use the leveling feature to ensure accurate horizontal alignment.
Step-by-step guide to calibrate the tilt sensor for optimal performance.
Instructions for setting and marking a single distance value.
Instructions for setting and marking two distance values for more complex layout tasks.
Calculates angles in a triangle using three distance measurements for corners.
How to find vertical distance using two auxiliary measurements.
How to find total distance using three auxiliary measurements.
How to find partial distance using three measurements.
Instructions for recalling previous measurements and deleting stored data.
Recommendations for keeping the meter in good condition, including cleaning instructions.
Procedure for disabling the meter if it is damaged or not in use.
Provides a comprehensive list of error codes and solutions for troubleshooting meter issues.
Key specifications including tolerance, range, and laser point size for distance measurements.
Specifications related to tilt measurement accuracy, range, and compass accuracy.
Details on laser class, protection, battery life, dimensions, weight, and temperature ranges.
Details on maximum relative humidity, safety standards, and EMC compliance.
