Fluke 424D - Basic Meter Operations; Core Button Functions and Modes

414D/419D/424D
Users Manual
10
Button Functions
This section is about how to use the buttons and identifies
when a function is model-dependent. When not identified,
all models include the function.
On/Off
Push  to turn on the Meter and laser. The display
shows the battery symbol until you push a different
button.
Push  for 2 seconds to turn off the meter.
Note
The Meter turns off automatically if not used in
180 seconds.
Basics
414D
Measure Button
Push
:
• 1x = Laser on
• 2x = Measure
In Pythagoras calculation mode:
• 2 seconds = Tracking (min/max measurement)
Function Buttons
Push
:
• 1x = Area
• 2x = Volume
• 3x = Pythagoras 1
• 4x = Pythagoras 2
419D/424D
Measure Button
When off, push  for 2 seconds = Continuous Laser On
Push :
• 1x = Laser On
• 2x = Measure
• 2 seconds = Tracking (min/max measurement)
Function Buttons
Push
:
• 1x = Pythagoras 1
• 2x = Pythagoras 2
• 3x = Pythagoras 3
• 4x = Stake Out (419D: 1 value / 424D: 2 values)
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com