Fluke 424D - Product Specifications; Distance Measurement Specs; Tilt Measurement Specs

Laser Distance Meter
Specifications
31
Specifications
414D 419D 424D
Distance Measurement
Typical Measurement Tolerance
[1]
± 2.0 mm (± 0.08 in)
[3]
± 1.0 mm (± 0.04 in)
[3]
Maximum Measurement Tolerance
[2]
± 3.0 mm (± 0.12 in)
[3]
± 2.0 mm (± 0.08 in)
[3]
Range at target plate 50 m / 165 ft 80 m / 260 ft 100 m / 330 ft
Typical Range
[1]
40 m / 130 ft 80 m / 260 ft
Range at unfavorable condition
[4]
35 m / 115 ft 60 m / 200 ft
Smallest unit displayed 1 mm / 1/16 in 1 mm / 1/32 in
∅ laser point at distances
6 mm @ 10 m / 30 mm @ 50 m / 60 mm @ 100 m
0.24 in @ 33 ft / 1.2 in @ 164 ft / 2.4 in @ 328 ft
Tilt measurement
Measurement tolerance to laser beam
[5]
no no ± 0.2 °
Measurement tolerance to case
[5]
no no ± 0.2 °
Range no no 360 °
Compass accuracy no no 8 points (± 22.5 °)
[6]
Shop for Fluke products online at:
1.877.766.5412
www.MyFlukeStore.com