Multifunction Calibrator
How to Contact Fluke Calibration
5
How to Contact Fluke Calibration
To contact Fluke Calibration, call one of the following telephone numbers:
• Technical Support USA: 1-877-355-3225
• Calibration/Repair USA: 1-877-355-3225
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31-40-2675-200
• Japan: +81-3-6714-3114
• Singapore: +65-6799-5566
• China: +86-400-810-3435
• Brazil: +55-11-3759-7600
• Anywhere in the world: +1-425-446-6110
To see product information or download manuals and the latest manual supplements, visit
Fluke Calibration’s website at www.flukecal.com.
To register your product, visit http://flukecal.com/register-product.
Instruction Manuals
The 5730A Calibrator ships with:
• 5730A Getting Started
• 5730A Operators Manual (provided on CD-ROM or a printed copy is available for
purchase through the Fluke Calibration Service Department)
To order, refer to the Fluke Calibration Catalog or contact a Fluke Calibration sales
representative. See “How to Contact Fluke Calibration”.
Wideband AC Voltage Module (Option 5730A/03 or 5730A/05)
The Wideband AC Voltage Module (Option 5730A/03 or 5730A/05) can be installed in
the 5730A Calibrator. The module is a high-accuracy, low-noise, extremely flat ac
voltage source to calibrate RF voltmeters, with a frequency range of 10 Hz to 30 MHz
(5730A/03) or 50 MHz (5730A/05). Output is in seven ranges from 300 μV (-57 dBm) to
3.5 V (+24 dBm) through a Type-N coaxial connector into a 50 Ω load. The output level
is selected in volts or dBm through either the front panel controls or under remote
control.
The wideband module also functions with the Calibrator output adjust controls that
display the error of a wideband meter in either percentage of output or in decibels.
Included with the wideband module is a Type-N output cable, a 50 Ω terminator, an N(f)
to BNC(m) adapter, and a BNC(f) to double banana plug adapter. The wideband module
is calibrated to the end of its standard-equipment output cable.
To Next Page
Loading...
Need help?
General
