19
Parts and Controls
Accessories
Accessories 7.3
Transport/Pour Lid 7.3.1
A transport/pour lid (Figure 3) is provided so the fluid being used does not have to be
removed when transporting. The lid doubles as a pour spout.
Figure 3
Pour Spout
Pour Spout
Cover
Transport
Plug
Transport/Pour Lid
Aluminum
Access Cover
(optional)
Guide Ring
Bath Lids and Lid Parts
Access Cover (Optional) 7.3.2
An aluminum access cover (Figure 3) may be purchased for optimum stability. Holes
should be drilled in the access cover to allow insertion of the probes into the tank. The
holes must be within the guide ring for the probes to fit into the probe basket.
Probe Basket 7.3.3
A probe basket (Figure 4) is provided as a guide for the probes and to prevent bumping
of the stir bar.
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct.com
To Next Page
Loading...
