To Next PageTo Next Page
Need help?Do you have a question about the Fluke Ti125 and is the answer not in the manual?
Instructions for charging using the two-bay charger base.
Instructions for charging using the imager's AC power socket.
Steps to save an image as a data file on the imager.
Steps to set the emissivity value numerically.
Setting a color alarm for high temperatures in the image.
Setting a color alarm for low temperatures or dew point.
Guidelines for safe handling and maintenance of the battery pack.
Instructions for charging using the two-bay charger base.
Instructions for charging using the imager's AC power socket.
Steps to save an image as a data file on the imager.
Steps to set the emissivity value numerically.
Setting a color alarm for high temperatures in the image.
Setting a color alarm for low temperatures or dew point.
Guidelines for safe handling and maintenance of the battery pack.
General| Temperature Range | -20 °C to +350 °C (-4 °F to +662 °F) |
|---|---|
| Image Resolution | 160 x 120 pixels |
| Image Capture | Yes |
| Accuracy | ± 2 °C or ± 2% of reading |
| Operating Temperature | -10 °C to +50 °C (14 °F to 122 °F) |
| Display | 3.5 inch LCD |
| Thermal Sensitivity (N.E.T.D) | < 0.1 °C |
| Data Storage | SD card |
| Emissivity Correction | Adjustable |
| Storage Temperature | -20 to 60 °C |
