Need help?Do you have a question about the Fluke Ti480 and is the answer not in the manual?
General| Sensor type | - |
|---|---|
| Sensor resolution (thermal module) | 640 x 480 pixels |
| Display type | LCD |
| Product color | Black, Yellow |
| Built-in display | Yes |
| Display diagonal | 3.5 \ |
| Storage temperature (T-T) | -20 - 50 °C |
| Operating temperature (T-T) | -10 - 50 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Digital zoom | 4 x |
| Standard palettes | Amber, Amber inverted, Blue-red, Grayscale, Grayscale inverted, High contrast, Hot metal, Ironbow |
| Thermal frame rate | 9 Hz |
| Infrared spectral band | 7.5 - 14 µm |
| Vertical field of view | 24 ° |
| Horizontal field of view | 34 ° |
| IFOV (spatial resolution) | 0.93 mRad |
| Internal storage capacity | 4 GB |
| Thermal sensitivity (NETD) | 50 mK |
| Temperature measurement range | -20 - 800 °C |
| Compatible memory cards | MicroSD (TransFlash) |
| Battery capacity | - mAh |
| Battery life (max) | 3 h |
| Battery recharge time | 2.5 h |
| Input voltage | 100 - 240 V |
Weight and Dimensions| Depth | 167 mm |
|---|---|
| Width | 122 mm |
| Height | 277 mm |
| Weight | 1040 g |
Identifies hazardous conditions, procedures, and general safety advice.
Identifies conditions causing damage and lists safety symbols.
Describes how to use the touch screen interface.
Details control panel buttons and basic operational steps.
Explains focus methods, capturing, and saving images.
Details options within the Measurement menu.
Adjusts background temp and transmission percentage.
Settings for spot markers and measurement zones.
Defines Level and Span parameters for temperature display.
Steps to manually adjust Level and Span.
How to set emissivity for accurate temperature readings.
Features like Filter Mode, MultiSharp Focus.
Using the laser for distance measurement.
How the LaserSharp Auto Focus System works.
Steps to sign into the Fluke Connect account.
Overview of the wireless connectivity system.
Settings to enable/disable gas detection mode.
Factors affecting gas leak detection and optimal placement.
Controlling the imager via PC or mobile app.
Procedures for cleaning the imager's case and lens.
Guidelines for handling and maintaining batteries.
Instructions for charging the imager's battery.
To Next Page
