Fluke TiR1 User Manual

PN 2803044
August 2007
© 2007 Fluke Corporation, All rights reserved. Printed in USA
All product names are trademarks of their respective companies.
Ti10, Ti25, TiR and TiR1
Thermal Imagers
Users Manual

Fluke TiR1 Specifications

General

Type	Thermal Imager
Resolution	160 x 120 pixels
Display	2.4" color LCD
IR Resolution	160 x 120 pixels
Field of View	23 ° x 17 °
Focus	Manual
Operating Temperature	-10 °C to +50 °C (14 °F to 122 °F)
Detector Type	Uncooled microbolometer
Image Frequency	9 Hz
Battery Type	Rechargeable lithium-ion
Infrared Resolution	160 x 120
Storage Temperature	-20 °C to +50 °C (-4 °F to 122 °F) without battery

Summary

LIMITED WARRANTY AND LIMITATION OF LIABILITY

Introduction

Contacting Fluke

How to contact Fluke via phone or website for support and registration.

Safety Information

Table 1. Symbols

Lists and explains symbols used in the manual and on the imager for warnings and status.

Unpacking the Imager

Charging the Battery

Instructions for charging the imager's battery before first use.

Turning the Imager On and Off

Procedure to power the thermal imager on and off using the softkey.

Features and Controls

Introduces the imager's features and controls, referencing Table 2.

Using the Menu

Changing the Displayed Language

Steps to change the language displayed on the imager's screen.

Setting the Imager Clock

Instructions for setting the internal real-time clock for date and time.

Setting the Date

Setting the Time

Focusing and Capturing an Image

Saving Imager Data

Adjusting the Thermal Image

Selecting a Palette

Setting the Range

Setting the Level (Manual)

Setting the Temperature Span (Manual)

Switching Between PIP and Full IR (Ti10 and TiR Only)

Setting IR-Fusion® and PIP (Ti25 and TiR1 Only)

Reviewing and Deleting Stored Images

Adding Voice Annotation to Saved Data (Ti25 and TiR1 Only)

Listening to Voice Annotations (Ti25 and TiR1 Only)

Changing the Temperature Units

Enabling/Disabling Spot Indicators (Ti25 and TiR1 Only)

Making Accurate Temperature Measurements

Setting Emissivity (Ti25 and TiR1 only)

Setting File Format

SmartView™™ Software

Changing the SD Card

Setting the Backlight

Detailed Specifications

Temperature Measurements

Detailed temperature ranges for different imager models.

Imaging Performance

Specifications related to field of view, resolution, focus, and detector.

Image Presentation

Details on available palettes and level/span settings.

IR-Fusion® Information

Voice Annotation

Image and Data Storage