Need help?Do you have a question about the Fluke Ti9 and is the answer not in the manual?
General| Type | Thermal Imager |
|---|---|
| Resolution | 160 x 120 pixels |
| Infrared Resolution | 160 x 120 pixels |
| Image Frequency | 9 Hz |
| Focus | Manual |
| IR Resolution | 160 x 120 |
| Detector Type | Focal Plane Array, uncooled microbolometer |
| Display | 3.5" LCD |
| Battery Type | Rechargeable Li-ion |
| Field of View | 20 ° x 15 ° |
Overview of the Fluke Ti series thermal imagers and their applications.
Provides Fluke contact details and essential safety precautions for imager use.
Instructions on how to charge the imager's battery correctly.
Identifies key physical components and controls of the imager.
Steps to power the thermal imager on and off using the softkey.
Guide to accessing, navigating, and configuring imager settings via menus.
Configuration for language, date, and time settings on the imager.
Procedures for focusing and capturing thermal images.
Process for saving images and adjusting thermal display settings like palette and range.
How to select view palettes and adjust temperature span/level settings.
Switching display modes, managing stored images, and file format options.
Changing temperature units and managing stored images.
Using SmartView software and managing the SD card for data storage.
Adjusting the LCD backlight to Auto-sensing or Full-Bright.
Guidance on factors affecting accuracy, especially emissivity correction.
Recommended cleaning procedures and guidelines for optimal battery performance.
Key operating parameters, power, and physical characteristics of the imager.
In-depth technical details including temperature range, accuracy, and imaging performance.
To Next Page
