Fluke Ti9 - Specifications; General Specifications

TiR Users Manual
General Specifications
Temperature
Operating.............................................................
-10 C to 50 C (14 F to 122 F)
Storage................................................................
-20 C to 50 C (-4 F to 122 F)
without batteries
Charging..............................................................
0 C to 40 C (32 F to 104 F)
Relative Humidity ..................................................
10 to 90 % non-condensing
Display ....................................................................
640 x 480 Color LCD, approx. 2” X 3”
(Landscape orientation) with Backlight
Controls and Adjustments
(selectable Bright or Auto)
User selectable temperature scale (C/F)
Language selection
Time/Date set
Software .................................................................SmartView
®
full analysis and reporting
software included
Power
Battery .................................................................Internal rechargeable battery pack
Battery Life ..........................................................3 to 4 hours continuous use (assumes
50 % brightness of LCD)
Battery Charge Time ...........................................2 hours full charge with ac adapter or
dc car charger
AC Operation/Charging .......................................AC adapter/charger (110 – 220 Vac,
50/60 Hz). Charges battery while
imager is operating. Universal ac
mains adapters included.
Power Saving ......................................................Sleep Mode activated after 5 minutes
of inactivity
Automatic Power Off after 30 minutes
of inactivity
Vibration .................................................................2 G, IEC 68-2-29
Shock......................................................................25 G, IEC 68-2-6
Drop ........................................................................2 meter drop, all sides