Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
22
LaserSharp Auto Focus System
The Laser Pointer/Distance Finder on the Imager is both a sighting aid and a part of the LaserSharp
Auto Focus System.
Warning
To prevent eye damage and personal injury, do not look into the laser. Do not point laser
directly at persons or animals or indirectly off reflective surfaces.
To use the LaserSharp Auto Focus System:
1. Select Camera > LaserSharp Auto Focus > On.
2. Point the Imager at the target.
3. Pull and hold the Secondary Trigger.
shows at the top of the display.
4. Position the red laser dot on the target.
5. Release the Secondary Trigger.
The auto focus system automatically focuses on the object.
Note
The laser pointer is aligned parallel to the infrared lens. In AutoBlend Mode, the laser pointer dot
is positioned just above the center point marker on the display. It can be easier to use your eyes
to locate the visible laser pointer on the target not on the display.
Video
The video controls include stop, rewind, fast forward, and pause/play functions. The thermal scene and
complexity of the recorded data affects the amount of time available to record a video. The video
capture format is set in the Settings menu. For more information, see File Format.
Record Video
To record:
1. Select Camera > Video.
2. Select Video/Audio or Video ONLY.
Wireless
Bluetooth
Uses Bluetooth technology to connect the Imager to a device
such as a wireless headset. See Wireless Connectivity.
WiFi Hotspot
Uses the Imager to create a wireless Hotspot when no WiFi
network exists. See Wireless Connectivity.
WiFi Network
Connects the Imager to a WiFi network so you can sign into your
Fluke Connect account on the Imager. See Wireless
Connectivity.
Table 12. Camera Menu (cont.)
Option Menu Option Description
To Next Page
Loading...
