Fluke Ti480 - Image Enhancement Features; Advanced Image Enhancements

Ti200, Ti300, Ti400, Ti450, Ti450SF6, Ti480
Users Manual
18
Image Enhancement
Use the Image Enhancement menu to activate the advanced features of the Imager. Activate either
MultiSharp Focus or SuperResolution individually. Use Filter Mode with either MultiSharp Focus or
SuperResolution. Table 11 lists the options in the Image Enhancement menu.
Display <options>
Sets which graphics to view on the display.
Note
Features that have On/Off controls must be turned on
and turned off with those controls.
Image
Enhancement
<options>
Sets the advanced image enhancement features of the
Imager. See Image Enhancement.
Logo
On
Turns on/off the Fluke logo on the display.
Off
Custom
With SmartView software, upload a custom logo to the
Imager from your PC through the USB connection.
Distance
On
Turns on/off the distance units on the display. See
Distance.
Off
<options> Sets units to feet or meters. See Distance.
Zoom <options> Sets digital zoom level.
Table 11. Image Enhancement Menu
Option Description
Filter Mode
Combine values from successive frames within a small range of
temperatures to reduce pixel noise or thermal sensitivity (NETD) to as low
as 30 mK.
Off
Turn off MultiSharp Focus mode or SuperResolution mode and not affect
Filter mode.
MultiSharp Focus
MultiSharp Focus captures several images focused on multiple targets
that are positioned at different distances from the Imager and creates one
image that focuses on the multiple targets at the same time.
In MultiSharp Focus mode, you can process the image in the camera or in
SmartView software.
In MultiSharp Focus (In PC only) mode, the image is not processed on the
Imager so you cannot view the image on the Imager. Use SmartView
software to view the image on your PC. Set the file format to .is2 for
MultiSharp Focus (In PC only) mode to work.
MultiSharp Focus (In
PC Only)
Table 10. Image Menu (cont.)
Option Menu Option Description