Need help?Do you have a question about the Fluke ii900 and is the answer not in the manual?
General| Product type | Ultrasonic leak detector |
|---|---|
| Housing color | Black, Yellow |
| Frequency range | 2 - 52 kHz |
| Detected gas types | Natural gas |
| Battery LED indicator | Yes |
| Storage temperature (T-T) | -20 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Battery life | 6 h |
Weight and Dimensions| Depth | 68 mm |
|---|---|
| Width | 322 mm |
| Height | 186 mm |
| Weight | 1700 g |
Details general and specific safety warnings and cautions for using the Imager.
Lists and describes the items included with the Acoustic Imager for initial setup.
Defines key terms and concepts relevant to acoustic measurements and the Imager.
Instructions for powering the Imager on/off and managing the rechargeable battery.
Identifies and describes the physical buttons and key features of the Imager.
Details the use of the hand/neck strap and the touchscreen display interface.
How to capture still images and record video clips using the Imager's interface.
Using LeakQ for leak estimation and PDQ Mode for electrical discharge analysis.
Managing saved files, adding text, photo, and tag notes to captured data.
Details how to add photo notes and predefined tag notes to files for enhanced data.
Adjusting dB scale, frequency ranges, and source detection modes for optimal sound analysis.
Configuring file formats, date/time, display, language, and factory reset options.
How to adjust the frequency band for sound detection and analysis.
Procedures for transferring files to a PC and updating the Imager's firmware.
Guidelines for cleaning the case, sensors, and general maintenance.
Information on environmental disposal, service intervals, and product specifications.
To Next Page
