Fluke ii900 - General Imager Configuration

ii900/ii910
Users Manual
14
Palette
Select the palette for the acoustic image. The color palettes offer
an equal, linear presentation of colors for the best presentation of
data detail. Or you can switch the live visual camera to greyscale
mode.
Markers
When the Centerpoint Marker is On, the dB level of the
Centerpoint shows on the display as value on the center of the
display.
Note
The display shows the dB value of the selected
frequencies as received in the center of the Field-of-
View. This is not the dB value of the sound source.
Settings
The Settings menu shows all the available settings for adjustment.
File format
• set image format (JPEG or PNG)
• set video format (MP4 format)
Date & Time
• set date and format
• set time and format
Display
• turn on or turn off the display logo
Localization
• select language
• set decimal separator to point or comma
• set units of measurement
Factory settings
• reset the unit to factory settings
• clear all images, videos, and user data
Clear User Data
• delete all saved images, videos, and profiles
Imager Info
• firmware version
• hardware version
Test Microphones
• verify the correct operation of the microphones
Save Diagnostic Information
• use at request of Fluke Customer Service to save diagnostic
information
Note
The diagnostic info file is saved in the Imager memory
at /User Data/DiagnosticInfo/.