EasyManua.ls Logo

Fluke 6105A - Features; General Specifications; Input Power; Dimensions

Fluke 6105A
34 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6100B/6105A
Getting Started
6
Features
The Instruments feature the following:
Traceable power and energy signals
Configurable from one to four independent phases
Full independent control of voltage and current on each phase
1 kV and 21 A available on each phase (50 A with the 50 A option, 80 A with the
80 A option) on each phase. By default, the N phase is limited to 33 V rms. This can
be overridden by the user. Setting up voltage and current waveforms are described in
later in this manual.
Up to 100 harmonics on either or both voltage and current channels at any one time
Fluctuating harmonics and interharmonics to IEC 61000-4-7 and 61000-4-13, 61000-
4-13 and 61000-4-14
Dips and swells to IEC 61000-4-11
Flicker to 61000-4-15
Simultaneous power quality phenomena to IEC61000-4-30 and 61000-4-34
Built-in IEC 61036 and IEC 62053 series current waveforms for static Watthour
meter testing
User-definable waveforms
User-selectable reactive power calculation method
>13 V peak compliance on all current outputs up to 21 A
Soft start options to handle inrush current taken by instruments that take power from
the voltage signal
Complex Instrument configurations can be saved to internal memory or to a USB
memory device for transfer to other 6100B systems
The optional Energy Comparator provides for calibration of energy meters
10 MHz or 20 MHz reference clock output option
General Specifications
Full specifications are located in the Users Manual.
Input Power
Voltage
100 V - 240 V with up to ±10 % fluctuations
Transient overvoltages Impulse withstand (overvoltage) category II of IEC 60364-4-443
Frequency 47 Hz - 63 Hz
Max. Consumption 1000 VA max from 100 - 130 V, 1250 VA max from 130 V - 260 V
Dimensions
6100B, 6101B, 6105A, and 6106A With 50 A or 80 A Options
Height 233 mm (9.17 inches) 324 mm (12.8 inches)
Height (without feet) 219 mm (8.6 inches) 310 mm (12.2 inches)
Width 432 mm (17 inches) 432 mm (17 inches)
Depth 630 mm (24.8 inches) 630 mm (24.8 inches)
Weight 23 kg (51 lb) 30 kg (66 lb)

Other manuals for Fluke 6105A

Related product manuals