700G Series
Users Manual
2
Standard Equipment
The Product ships with:
• Protective Cover
• Three AA Batteries (installed)
• NPT/metric Adapter
Safety Information
A Warning identifies conditions and procedures that are
dangerous to the user. A Caution identifies conditions
and procedures that can cause damage to the Product or
the equipment under test.
Warning
To prevent possible electrical shock, fire, or
personal injury:
• Only assemble and operate high-
pressure systems if you know the
correct safety procedures. High-pressure
liquids and gases are hazardous and the
energy from them can be released
without warning.
• Use the Product only as specified, or the
protection supplied by the Product can
be compromised.
• The battery door must be closed and
locked before you operate the Product.
• Replace the batteries when the low
battery indicator () shows to prevent
incorrect measurements.
• Do not use and disable the Product if it
is damaged.
• Read all safety Information before you
use the Product.
• Do not use the Product in damp or wet
environments.
Caution
To avoid possible damage to Product or to
equipment under test:
• If the display reads “OL” the range limit
is exceeded and the pressure source
must immediately be removed.
• Do not exceed the maximum torque
allowed. Maximum torque allowed is
13,5 Nm = 10 ftlbs.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com
To Next Page
Loading...
Need help?
General
