3 Fluke Corporation 709/709H Precision Current Loop Calibrator
Ordering information
FLUKE-709 Precision Loop Calibrator
FLUKE-709H Precision HART Loop Calibrator
Fluke Corporation
PO Box 9090, Everett, WA 98206 U.S.A.
Fluke Europe B.V.
PO Box 1186, 5602 BD
Eindhoven, The Netherlands
Fluke. The Most Trusted Tools
in the World.
For more information call:
In the U.S.A. (800) 443-5853 or
Fax (425) 446-5116
In Europe/M-East/Africa +31 (0) 40 2675 200 or
Fax +31 (0) 40 2675 222
In Canada (800)-36-FLUKE or
Fax (905) 890-6866
From other countries +1 (425) 446-5500 or
Fax +1 (425) 446-5116
Web access: http://www.fluke.com
©2012 Fluke Corporation.
Specifications subject to change without notice.
Printed in U.S.A. 12/2012 4287255A_EN
Modification of this document is not
permitted without written permission
from Fluke Corporation.
HART communication
The Fluke 709H offers a built-in HART modem for communication
capability to perform the following commands:
• Read message
• Read tag, descriptor, calibration date
• Read sensor PV information
• Read PV output information
• Read long tag
• Write PV ranges (upper and lower)
• Enter/exit fixed current mode
• Set zero offset
• Trim DAC zero (mA output 4 mA)
• Trim DAC gain (mA output 20 mA)
• The Fluke 709H also offers ability to store up to twenty HART
device configuration files for uploading via 709H/TRACK software.
via the 709H/TRACK software. Configurations can be stored as .csv
or .txt files. This allows the end user to document plant HART easily.
Configurations can be stored as .csv or .txt files. This feature gives
the technician direct access to key device parameters, allowing
better troubleshooting, calibrating and maintaining of plant assets.
Standard equipment
• Two AC72 alligator clips (709)
• TL75 test leads (709)
• Extended tooth alligator clip set (709H)
• 75X-8014 stackable lead set (709H)
• TP220 test probes (709H)
• AC280 SureGrip™ hook clips (709H)
• HART cable (709H only)
• Soft case
• Six AAA batteries (installed)
• 709/709H Product manual CD-ROM
• 709/709H Quick reference guide
• 709/709H Safety information
Optional software
• 709H/TRACK software/cable
To Previous Page
Loading...
