Need help?Do you have a question about the Fluke 707Ex and is the answer not in the manual?
General| Manual | Yes |
|---|---|
| Battery voltage | 9 V |
| Battery technology | Alkaline |
| Control type | Buttons |
| Loop voltage | 30 V |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | -10 - 55 °C |
| Voltage measurement accuracy | 0.015 % |
| Voltage measurement resolution | 0.001 V |
| Operating relative humidity (H-H) | 0 - 95 % |
Weight and Dimensions| Depth | 41 mm |
|---|---|
| Width | 70 mm |
| Height | 152 mm |
| Weight | 224 g |
Overview of the Fluke 707Ex mA Calibrator, its capabilities and intended use.
Details conditions that can compromise safety features or cause damage to the unit.
Outlines regulatory requirements for the safe use of the 707Ex mA Calibrator.
Presents specific certification details and defines symbols used in the manual.
Instructions for switching between the 4-20 mA and 0-20 mA output span settings.
Explains how to use the SOURCE mode to supply current to passive circuits.
Details on how to use auto ramp functions for continuous current variation.
Provides troubleshooting tips and guidance for resolving operational issues.
Instructions on proper cleaning methods for the calibrator's exterior.
Recommendation for annual calibration to maintain accuracy and performance.
Covers operating altitude, temperature, humidity, vibration, shock, size, and weight.
Details safety compliance and power requirements including battery life.
To Next Page
