Fluke 702 User Manual

Artisan Technology Group is your source for quality
new and certied-used/pre-owned equipment
• FAST SHIPPING AND
DELIVERY
• TENS OF THOUSANDS OF
IN-STOCK ITEMS
• EQUIPMENT DEMOS
• HUNDREDS OF
MANUFACTURERS
SUPPORTED
• LEASING/MONTHLY
RENTALS
• ITAR CERTIFIED
SECURE ASSET SOLUTIONS
SERVICE CENTER REPAIRS
Experienced engineers and technicians on staff
at our full-service, in-house repair center
WE BUY USED EQUIPMENT
Sell your excess, underutilized, and idle used equipment
We also offer credit for buy-backs and trade-ins
www.artisantg.com/WeBuyEquipment
REMOTE INSPECTION
Remotely inspect equipment before purchasing with
our interactive website at www.instraview.com
LOOKING FOR MORE INFORMATION?
Visit us on the web at www.artisantg.com for more
information on price quotations, drivers, technical
specications, manuals, and documentation
Contact us: (888) 88-SOURCE | sales@artisantg.com | www.artisantg.com
SM
View
Instra

Fluke 702 Specifications

General

DC Current Range	0 to 24 mA
Accuracy	0.05% of full scale
Pressure Units	inH2O, psi, bar, mBar, kPa, kgcm2, cmH2O
Display	LCD
Loop Power	24 V DC
Operating Temperature	-10 °C to 55 °C
Storage Temperature	-40 °C to 60 °C
Warranty	3 years

Summary

Introduction to the Documenting Process Calibrator

Standard Equipment Included

Safety Information and Warnings

Using Measure Mode

Measurement Ranges and Parameters

Covers measurement ranges and electrical parameter measurement.

Continuity and Pressure Measurement

Procedures for continuity testing and measuring pressure.

Temperature Measurement

Guidance on measuring temperature using thermocouples.

RTD Measurement

Instructions for measuring temperature with Resistance-Temperature Detectors.

Using Source Mode

Sourcing Electrical Signals

Covers sourcing electrical parameters, 4-20mA transmitters, and loop power.

Sourcing Physical Signals

Procedures for sourcing pressure, simulating thermocouples, and RTDs.

Simultaneous Measure/Source Operations

Calibrating a Process Instrument

General procedures for calibrating process instruments.

Generating “As Found” Test Data

Steps to generate and record 'as found' calibration data.

Adjusting the Transmitter

Procedure for making calibration adjustments to a transmitter.

“As Left” Test Run

Technical Specifications

Electrical Measurement Specifications

Electrical Output Specifications

Physical Measurements & Outputs