716 English Instruction Sheet
Page
2
Safety Information
Use the Calibrator only as specified in this instruction sheet,
otherwise the protection provided by the Calibrator may be
impaired.
A Warning identifies conditions and actions that pose hazard(s)
to the user; a Caution identifies conditions and actions that may
damage the Calibrator or the equipment under test.
W Warning
To avoid possible electric shock or personal injury:
• Never apply more than 30 V between the mA
terminals, or between either of the mA terminals
and earth ground.
• Remove the test leads from the Calibrator
before you open the battery door.
• Make sure the battery door is closed and
latched before you operate the Calibrator.
• Do not operate the Calibrator if it is damaged.
• Do not operate the Calibrator around explosive
gas, vapor, or dust.
• When servicing the Calibrator, use only
specified replacement parts
• To avoid a violent release of pressure in a
pressurized system, shut off the isolation valve
and slowly bleed off the pressure before you
attach or detach the pressure module to the
pressure line.
Caution
To avoid mechanical, overpressure, or corrosion
damage to the Pressure Module, follow all
procedures in the related
Instruction Sheet
.
To Next Page
Loading...
Need help?
General
