Fluke 719PRO - Page 56

719PRO
Users Manual
46
Command Description
DAMP Turns Damp on or off.
DAMP? Returns if DAMP is on/off
DISPLAY
Turns on/off the displays
specified in the command
DISPLAY?
Returns which displays are
on/off
ERROR_LOOP
Turns loop power on or off in
percent error mode
ERROR_LOOP?
Returns the current state of
loop power in error mode
ERROR_MODE
Turns percent error mode on
or off
ERROR_MODE?
Returns whether percent
error mode is on or off
ERROR_PORT
Set the pressure port for
percent error mode
ERROR_PORT?
Returns the pressure port for
percent error mode
Command Description
FAULT?
Returns the most recent
error code
FUNC
Sets the display mode as
specified in the command
FUNC?
Returns the current mode of
the upper, middle, and lower
display
HART_ON Turns the hart resistor on.
HART_OFF Turns the hart resistor off.
HART?
Returns the current state of
the Hart resistor.
HI_ERR
Sets the 100 % of span limit
for percent error mode
HI_ERR?
Returns the 100 % of span
limit for percent error mode
IO_STATE Set the Product's mA state.
IO_STATE? Return the Product's mA state.