Fluke 732a - Page 44

732A
INTRODUCTION
This section contains the parts list of the 732A
DC
Reference Standard. Components are
listed
aiphanumerically«
Farts lists include the following information:
1. Reference Designation.
2.
Description of
each
Part.
3.
FLUKE Stock
Number.
4.
Federal
Supply
Code
for Manufacturers.
5. Manufacturer’s
Part Number.
6.
Total Quantity
of
Components Per Assembly.
Although
Fluke recommends module
exchange
in place
of
component-level repair, this manual also includes
schematics and a discussion of the theory of operation.
Service
by non-factory personnel
voids
the
warranty.
Use
of parts not
approved by Fluke
may
compromise
board
specifications and operation.
HOW
TO
OBTAIN
PARTS
Components
may be ordered
directly from the John
Fluke
Mfg.
Co., Inc.
or
its
authorized
representative by
using
the
Fluke
Stock Number or from the
manufacturer
by
using
the
manufacturer’s
part number.
In
the
event the part you
order
has been
replaced
by a
new
or
improved
part,
the replacement will be accompanied
by
an
explanatory note
and
installation
instructions,
if
necessary.
To
ensure
prompt
handling
of
your order,
include
the
following
information:
1.
Quantity.
2.
Fluke
Stock
Number.
3.
Description.
4. Reference
Designation.
5.
Printed Circuit Board Part
Number
and
Revision Letter,
Parts
price
information
is
available from the John
Fluke
Mfg.
Co.,
Inc. or from its
representatives.