HART Mode
Communication Operations
9
See Process Variables
From the Active Device screen:
1. Push the Process softkey to see more device
variables and their continuously updated values.
2. Select View Process Variables.
3. Push .
To see more data, push the Next Page softkey. See
Figure 6.
gnx08s.bmp
Figure 6. Device Variables Screen
Setup Operations
The Setup softkey gives access to these five setup
functions:
• Basic
• Sensor
• Device Identification
• HART Output
• HART Information
Basic
Use the Basic setup screen to replicate a transmitter as
described at the end of this manual.
From the Active Device screen, push the Setup and
Basic softkeys. See Figure 7.
gnx09s.bmp
Figure 7. Basic Setup Screen
To Next Page
