Fluke 8502A - Page 9

Some
semiconductors
and
custom IC’s
can be
damaged by
electrostatic
discharge
during
handling.
This notice
explains how you can
minimize
the chances
of
destroying such devices
by:
1.
Knowing that
there is a
problem.
2.
Learning the
guidelines
for handling them.
3. Using
the
procedures, and
packaging and
bench
techniques
that
are
recommended.
The
Static
Sensitive (S.S.)
devices
are identified in
the Fluke
technical
manual parts list
with the symbol
The
following
practices
should be
followed to
minimize
damage to
S.S. devices.
2.
KEEP
PARTS IN
ORIGINAL
CONTAINERS
UNTIL READY FOR
USE.
4. HANDLE S.S.
DEVICES
BY THE BODY