87V MAX
Calibration Information
10
7. Replace the fuse compartment door by aligning the arrow on the fuse door
with the arrow on the case bottom and lowering the door into the fuse
compartment.
8. Replace the fuse compartment seal by aligning the tab on the seal with the
outline on the case bottom. Ensure the seal () is properly seated.
9. Refer to steps four through six under the Replacing the Batteries section
above to reinstall the battery door.
1
4
5
6
2
3
gaq10.emf
Figure 2. Battery and Fuse Replacement
To Next Page
Loading...
