8808A
Getting Started Manual
2
Manual Set
The manual set for this Meter consists of a printed Getting Started Manual and a Users
Manual on a CD-ROM.
This manual contains basic getting started information, contacting Fluke, unpacking, and
general specifications. This manual also provides setup and operation information for the
Meter, descriptions of the Meter’s front and rear-panel features, and information about
setting up and powering up the Meter. Please read this information before operating the
Meter.
The Users Manual contains information on specifications, setup and operating from the
front panel. In addition, it contains information on using the Meter remotely from a PC or
instrument controller.
Contacting Fluke
To order accessories, receive operating assistance, or get the location of the nearest Fluke
distributor or Service Center, call:
USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or visit Fluke's Web site at www.fluke.com
.
To register this product, visit register.fluke.com.
Safety Information
This section addresses safety considerations and describes symbols that may appear on
the Meter or in the manual.
A Warning statement identifies conditions or practices that could result in injury or
death. A Caution statement identifies conditions or practices that could result in damage
to the Meter or equipment to which it is connected.
XWWarning
To avoid electric shock, personal injury, or death, carefully read
the information in Table 1, “Safety Information,” before
attempting to install, use, or service the Meter.
General Safety Summary
This instrument has been designed and tested in accordance with the European standard
publication EN61010-1: 2001 and U.S. / Canadian standard publications UL 61010-
1:2004and CAN/CSA-C22.2 No.61010.1:2004. The Meter has been supplied in a safe
condition.
This manual contains information and warnings that must be observed to keep the Meter
in a safe condition and ensure safe operation.
To use the Meter correctly and safely, read and follow the precautions in Table 1 and
follow all the safety instructions or warnings given throughout this manual that relate to
specific measurement functions. In addition, follow all generally accepted safety
practices and procedures required when working with and around electricity.
To Next Page
Loading...
