Fluke 9103 - Instrument Configuration and Parameters

•
Insert A (variety block): 1/2”, 3/8”, 1/4”, 3/16”, 1/8”, and 1/16” holes
•
Insert B (comparison block): 2 each 3/8”, 2 each 1/4”, and 2 each 3/16”
holes
•
Insert C (1/4” comparison block): 6 each 1/4” holes
or
•
Insert D: 2 each 3 mm, 2 each 4 mm, and 2 each 6 mm holes
9103 Dry-Well
User’s Guide
16
Interchangeable Insert Options
1/4"
3/16"
1/8"
1/2"
1/16"
3/8"
Insert “A”
3/8"
3/8"
1/4"
1/4"
3/16"
3/16"
Insert “B”
1/4"
Insert “C”
6mm
Insert “D”
4mm
6mm
3mm
3mm
4mm
Figure 3 Inserts Available for the 9103 Block Assembly
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct.com