6 General
6.1 Changing Display Units
The instrument can display temperature in Celsius or Fahrenheit. The instru
-
ments are shipped from the factory set to Celsius. To change to Fahrenheit or
back to Celsius there are two ways:
1. Press “SET” and “UP” simultaneously. This will change the display
units.
or
1. Press the “SET” key three times from the temperature display to show
Un = C
2. Press the “UP” or “DOWN” key to change units.
3. Press “SET” to store changes.
6.2 Thermal Electric Devices (TED)
The power of the instrument is precisely controlled by the temperature control-
ler to maintain a constant temperature. Power is controlled by periodically
switching the TEDs on for a certain amount of time using power transistors.
17
6 General
Changing Display Units
1.888.475.5235info@Fluke-Direct.com
Fluke-Direct.com
To Next Page
Loading...
