Fluke 923 - Velocity Probe

Air Velocity Meter
Product Use
9
Table 4. Buttons (cont.)
Button Function
Recall

Enter- Push when you set the measurement or
function parameters to keep the value. When
used with  and  and , you can recall
recorded data.

Shift- The Products secondary functions operate
with . Secondary functions are shown
above the buttons.

Save- (Located on the Probe). Push to record a
current probe measurement.
Auto Power Off
To conserve battery power, the Product turns off after 15 minutes
of non-use. Push  to turn the Product on.
Velocity Probe
The Velocity Probe measures air velocity and temperature. When
the Product is turned on, the wireless indicator light on the Probe
lights (©). If the indicator does not come on, make sure the
Probe battery is charged or replace it if necessary. When the Probe
is removed from the Product base, the wireless indicator light will
flash and © shows on the display. To remove the Probe from the
base, see Figure 3.