Fluke 923 - Samples; Measurement Units

923
Users Manual
14
2. Put the Probe sensor perpendicular to the air stream that you
will measure. Make sure that the sensor cover is pulled back
to show the sensor.
3. Push  on the Product base, or  on the Probe to record
the flow indication.
Note
The Samples indicator on the display increases.
Samples
The Product can record 99 samples of velocity and 99 samples of
flow measurement data, 198 samples total.
To see the recorded samples:
1. Push .
2. Push  to access the Recall function.
3. Push  to move forward and  to move backward through
the samples.
All data for the recorded samples is shown.
Measurement Units
The Product shows measurements in different measurement units.
To choose which units are shown:
1. Push .
2. Push  to access the Units function.