Air Velocity Meter
Product Use
15
The first Flow units screen shows. To change the measurement
units for the duct size to centimetres (cm) or inches (in):
1. Push and to choose between cm and in.
2. Push to save the choice.
The second Flow units screen shows. To change between cubic
feet per minute (cfm), litres per second (l/s), and cubic meters per
hour (m3/hr):
1. Push and to choose the necessary measurement unit.
2. Push to record the selection.
The Velocity units screen shows. To change between feet per
minute (fpm) or meters per second (m/s):
1. Push and to choose the necessary measurement unit.
2. Push to record the choice.
The temperature units screen shows. To select between degrees
Fahrenheit (°F) and degrees Celsius (°C):
1. Push and to choose the necessary measurement unit.
2. Push to record the choice.
The Product changes to velocity mode. To exit from the
measurement units menu, push . All preferences to that point
are kept. The preferences are also kept if the Product turns off.
To Next Page
Loading...
