975
Users Manual
2
• Single-point and continuous data logging options
• CO alarm
• Detachable velocity probe (optional)
• FlukeView Forms software with USB cable for
downloading stored data
• Hard shell carrying case
• Protective holster
• Calibration cap and tubing
• Calibration certificate for NIST traceability
• Kensington lock-ready. See Figure 5.
Contacting Fluke
To contact Fluke or for service, call one of the following
telephone numbers:
USA: 1-888-44-FLUKE (1-888-443-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
Or, visit Fluke's Web site at www.fluke.com
.
To register your product, visit register.fluke.com
Safety Information
A Warning identifies a condition or action that pose
hazard(s) to the user; a Caution identifies a condition or
action that may damage the Meter or the equipment
under test.
XWWarning
To avoid injury, or damage to the Meter,
follow these safety guidelines:
• Read the entire users manual before
using the Meter.
• Use the Meter only as described in the
Users Manual otherwise the protection
provided by the equipment may be
impaired.
• Inspect the Meter before use. Do not use
it if it appears damaged.
• The Meter contains no user-serviceable
parts. Do not open the instrument. For
service and rechargeable-battery
replacement, the instrument must be
sent to Fluke. See “Contacting Fluke”.
• Have the Meter serviced only by qualified
service personnel.
• Always use the ac adapter/charger and
connector (supplied with the Meter)
appropriate for the voltage and outlet of
the country or location in which you are
working.
WCaution
To avoid possible damage to the Meter, avoid
using the Meter in an excessively dirty or
dusty atmosphere. Excessive particle intake
can damage the Meter.
To Next Page
Loading...
