18
C9970 Voltage Detector
Users Guide
Specifications
Voltage sensing ranges 6 VDC to 1500 VDC, direct contact
100 VAC to 15,000 VAC, 60 Hz, non-contact voltage
LEDs Green LED indicates no hazardous voltage.
Red LED indicates hazardous voltage
Agency approvals
)
Safety rating Meets IEC 61010-1, 1000V CAT IV, Pollution degree 2
IP rating IP 40
Operating temperature -10 °C to 50 °C
Operating humidity
ranges
0 % to 95 % (0 °C to 30 °C)
0 % to 75 % (30 °C to 40 °C)
0 % to 45 % (40 °C to 55 °C)
Altitude 2000 m
Battery 9 V zinc-carbon. Fluke Networks recommends a
Rayovac
®
9 V battery, Model D1604. See “Battery
Replacement” on page 4.
Low battery indication Green LED is dim or off when you press the trigger
To Previous Page
Loading...
Need help?
General
