DSP-4000 Series
Users Manual
1-4
Standard Accessories
A DSP-4000 Series test tool comes with the following accessories, which are
shown in Figure 1-1. If the test tool is damaged or something is missing, contact
the place of purchase immediately.
• 1 DSP-4000SR or DSP-4100SR remote unit (not shown)
• 2 DSP-LIA011 Basic Link Adapter for Cat 5E
• 2 DSP-LIA012 Channel Adapters for Cat 5E
• 2 AC adapter/chargers 120 V (US only) or universal adapter/chargers and line
cords (outside North America)
• 1 Memory card reader (DSP-4100)
• 1 16 MB memory card (DSP-4100)
• 2 NiMH battery packs (installed)
• 2 Headsets
• 1 DSP-4000 Calibration Module
• 1 50 Ω BNC coaxial cable
• 1 RJ45 to BNC adapter
• 1 PC serial interface (EIA-232C) cable
• 2 Carrying straps
• 1 CableManager CD
• 1 Users manual (not shown)
• 1 Warranty registration card (not shown)
• 1 Soft carrying case (not shown)
If you purchased optional Fiber Test Adapters, refer to the Fiber Test Adapter
users manual for a list of fiber accessories.
To Next Page
Loading...
