CERTIFIBER ENGLISH - 25
The Editing... screen appears with the cursor
in the Company Name field.
4. Use the é or ê arrow key to scroll through
the characters in the spin wheel.
5. Press Enter to select the character located
in the center of the spin wheel. Press Shift +
Enter to select a lower case letter.
(See Chapter 1 - Introduction: Editing with
CERTIFIBER for detailed information).
Up to 12 characters can be edited individually
at the cursor position. Use the ç and è to
move right or left within a string of charac-
ters.
6. Repeat steps 4 and 5 until the field is
completed.
7. Press F2 (Delete) to remove a letter from
the field.
8. Press F1 (OK) to exit the Edit screen.
9. Highlight the Operator Name and press F2
(Edit).
10. Edit each character in the Edit screen
individually as described in steps 4 through 8.
11. Press F1 (Save) to save the names and
return to the Setup screen.
Fiber GRI
A fiber cables Graded Refractive Index (GRI)
differs depending on the supplier. To receive
accurate length results for different fiber
cables, CERTIFIBER has user definable GRI values
for both wavelengths.
The default GRI values used for a 62.5 micron
All manuals and user guides at all-guides.com
To Next Page
Loading...
