CERTIFIBER ENGLISH - 43
are stored in CERTIFIBERs memory will be
transferred directly to the PC.
Consult the Scanlink Tools on-line Help file
for further instructions for uploading, view-
ing, storing and printing test results.
7. Turn CERTIFIBER off when the transfer is
completed.
Printing Test Results
Autotest results can be printed from the PC to
a printer.
Scanlink can be used to save and print data.
Consult the Scanlink Tools help file for
further information about printing test
results.
Sample Autotest Certification Report
The information on your Autotest printout
varies depending on the type of Autotest that
was used.
The name of the Autotest that was used to
run the test, is displayed right below the
company name, and the report title.
The heading provides information on the
Circuit ID, the overall test result, etc. The
number of connections and splices used in
the link will only appear when the Autotest
performed was equation-based.
The Test Direction depends on your scanner
settings. Choices are: CERTIFIBER - -> Remote,
Remote - -> CERTIFIBER, Bidirectional.
The Actual Results vary depending on your
All manuals and user guides at all-guides.com
To Next Page
Loading...
