SAFETY
WARNINGS
For safe use of Datapaq equipment, always:
• Take care to follow its supplied instructions.
• Observe any warning signs shown on the equipment.
Indicates potential hazard.
On Datapaq equipment this normally warns of high temperature, but,
where you see the symbol, consult the manual for further explanation.
Warns of high temperatures.
Where this symbol appears on Datapaq equipment, its surface may be
excessively hot (or excessively cold) and may thus cause skin burns.
© Fluke Process Instruments, Cambridge, UK 2018
All rights reserved
Fluke Process Instruments makes no representations or warranties of any kind whatsoever with respect
to the contents hereof and specifically disclaims any implied warranties of merchantability or fitness for
any particular purpose. Fluke Process Instruments shall not be liable for errors contained herein or for
incidental or consequential damages in connection with the furnishing, performance or use of
the Datapaq software, associated hardware or this material.
Fluke Process Instruments reserves the right to revise this publication from time to time and to make
changes to the content hereof without obligation to notify any person of such revisions or changes.
Datapaq, Reflow Tracker and the Fluke Process Instruments logo are registered trademarks of
Fluke Process Instruments. Microsoft and Windows are registered trademarks of Microsoft Corporation.
Manual set in 10 pt Gill Sans.
User manuals are available in other languages; contact Fluke Process Instruments for details.
To Next Page
Loading...
Need help?
General
