DTX-MFM2/GFM2/SFM2 Fiber Modules
Users Manual
50
Options and Accessories
For a complete list of options and accessories visit the Fluke
Networks website at www.flukenetworks.com.
To order options or accessories, contact Fluke Networks as
described on page 2.
Maintenance
Follow the maintenance procedures given in the DTX
Series CableAnalyzer Users Manual.
Clean the optical connectors as described on page 10.
Replacing Fiber Test Reference Cords
Choose replacement fiber optic test reference cords that
meet the following requirements:
•
They meet the requirements of ISO/IEC 14763-3.
•
Core and cladding size: match the fiber to be tested
•
Connector polish: PC or UPC. Use APC only for tests on
cabling with APC connectors.
•
Test reference cord length: maximum 5 m
To ensure optimum performance from your tester, get
replacement test reference cords from Fluke Networks.
Using the Smart Remote with an
OptiFiber
™
Certifying OTDR
You can use a DTX Series smart remote with a
DTX-MFM2 or DTX-SFM2 fiber module as the remote for a
Fluke Networks OptiFiber Certifying OTDR. The DTX
remote takes the place of a second OptiFiber tester for
measuring loss and length with the OptiFiber loss/length
option in Smart Remote mode. You can buy a smart
remote separately for this purpose. See the Fluke
Networks website or contact Fluke Networks for details.
To Next Page
Loading...
