Fluke i310s - General Characteristics; Safety Standards; EMC Standards

Distributor of Fluke Electronics: Excellent Integrated System Limited
Datasheet of I310S - CURRENT PROBE AC/DC
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
i310s English Instruction Sheet
Page 4
General Characteristics
Maximum Conductor
Size
19 mm (0.748 in) diameter
Output Cable and
Connections
Safety BNC connector supplied
with safety 4 mm adapter
Output Zero Manual adjust via thumbwheel
Cable Length 2 meters
Operating Temperature
Range
-10 to +50 °C (14 to +122 °F)
Storage Temperature
Range (with battery
removed)
-20 to +85 °C (-4 to +185 °F)
Operating Humidity 15 % to 85 % (non-condensing)
Weight 250 g (8.812 oz)
Safety Standards
EN 61010-1: 2001
EN 61010-2-032: 2002
EN 61010-031: 2002
300 V rms Category III, Pollution Degree 2
Use of the Clamp on non-insulated conductors is limited to 300
V ac rms or dc and frequencies below 1 kHz.
EMC Standards
EN 61236 :1998 +A1, A2, & A3
5 / 9
5 / 9