Fluke ScopeMeter 125B - Hanger; Language Selection; Tilt Stand

123B/124B/125B
Users Manual
Tilt Stand
The Test Tool is equipped with a tilt stand, allowing
viewing from an angle. You can also use the tilt stand to
hang the Test Tool at a convenient viewing position. See
Figure 5.
Hanger
The optional hanger accessory is magnetic and used to
hang the Test Tool on metal surfaces such as a cabinet
door. See Figure 5.
Language Selection
1
To change the language:
1. Push  to open the Menu.
2. Use YZ to highlight USER OPTIONS.
3. Push  to open the USER OPTIONS menu.
2
4. Use
YZ to highlight Language.
5. Push  to open the USER > LANGUAGE menu.
6. Use YZ to highlight the language preference.
3
7. Push  to accept the change and exit the menu.
hxv50.eps
Figure 5. Tilt Stand and Hanger
7.
12