123B/124B/125B
Users Manual
W Caution
Do not use the USB port to directly
communicate with an external device.
To set up the Test Tool for use with a wireless
connection:
1. Push + 1 to turn on the WiFi. shows in the
Information area.
2. For the first-time setup, push to open the Menu.
3. Use
YZ to highlight USER OPTIONS.
4. Push to open the USER OPTIONS menu.
5. Use
YZ to highlight Information.
6. Push to open the INFORMATION menu.
7. Push 1 to open the WiFi Settings menu.
The menu shows:
• WiFi name. The SSID is used to detect the Test Tool
WiFi.
• IP Address. Additional information about the
connection and not required to establish a
connection.
Push + 1 to turn off WiFi. disappears from the
top of the screen in the Information area.
60
To Next Page
Loading...
