Connectivity Tests
Introduction
6
6-7
ace617s.bmp
Figure 6-10. IP Configuration
When you press a address box the Edit Key Devices
screen displays (Figure 6-11) and enables you to edit
address information.
ace616s.bmp
Figure 6-11. Edit Key Devices
For IP, enter the IP address of the device. For IPX, you
must enter the Node and Network addresses. After you
enter the address, the Device Name box displays the
name assigned to the device (if available from the Station
List).
To edit an existing name or address of a device, press
the box that contains the item you wish to edit and make
To Next Page
Loading...
