Auto Power-Off
If auto power-off is enabled, the source turns off after 30 minutes
if no keys are pressed.
To disable or enable auto power-off, hold down
M for 4 seconds.
•
If auto power-off is enabled, all LEDs turn on for 3 seconds.
•
If auto power-off is disabled, all LEDs blink for 3 seconds and
the LOW BATTERY LED blinks occasionally.
Registration
Registering your product with Fluke Networks gives you access to
valuable information on product updates, troubleshooting tips,
and other support services. To register, fill out the online
registration form on the Fluke Networks website at
www.flukenetworks.com/registration.
Contacting Fluke Networks
www.flukenetworks.com
support@flukenetworks.com
+1-425-446-4519
•
Australia: 61 (2) 8850-3333 or 61 (3) 9329-0244
•
Beijing: 86 (10) 6512-3435
•
Brazil: 11 3759 7600
•
Canada: 1-800-363-5853
•
Europe: +44-(0)1923-281-300
•
Hong Kong: 852 2721-3228
•
Japan: 03-3434-0510
•
Korea: 82 2 539-6311
•
Singapore: 65 6799-5566
•
Taiwan: (886) 2-227-83199
•
USA: 1-800-283-5853
Visit our website for a complete list of phone numbers.
To Next Page
Loading...
