Fluke T130 - User Manual

T90/T110/T130/T150
Voltage/Continuity Tester
Instruction Sheet
Introduction
The Fluke T90/T110/T130/T150 Electrical Testers (the
Tester or Product) are voltage and continuity testers
with a rotary eld indication (T110/T130/T150 only).
Their primary use is for test and measurement in
industrial, commercial, and household environments.
This Product complies with the most recent safety
standards for safe, reliable test and measurement.
The xed test probe cover prevents the risk of injury
when you move the instrument.
How to Contact Fluke
To contact Fluke, call one of the following telephone
numbers:
• Germany: 07684 - 80 09 545
• France: 01 48 17 37 37
• United Kingdom: +44-0-1603256600
Go to www.uke.com to register your product,
download manuals, and nd more information.
To view, print, or download the latest manual
supplement, visit http://us.uke.com/usen/support/
manuals.
Safety Information
 Warning
To prevent possible electrical shock, re, or
personal injury:
● Read all safety Information before you use the
Product.
● Use the Product only as specied, or the
protection supplied by the Product can be
compromised.
● Measure a known voltage rst to make sure
that the Product operates correctly.
● Do not apply more than the rated voltage,
between the terminals or between each
terminal and earth ground.
PN 3928132
● Limit operation to the specied measurement
category or voltage ratings.
● Do not work alone.
● Comply with local and national safety codes.
Use personal protective equipment (approved
rubber gloves, face protection, and ame-
resistant clothes) to prevent shock and arc
blast injury where hazardous live conductors
are exposed.
● Do not use the Product around explosive gas,
vapor, or in damp or wet environments.
● Do not use and disable the Product if it is
damaged.
● Do not use the Product if it operates
incorrectly.
● Keep ngers behind the nger guards on the
probes.
● Do not use the Product if the test leads are
damaged.
● Examine the case before you use the Product.
Look for cracks or missing plastic.
● The battery door must be closed and fastened
before you operate the Product.
● Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
● Repair the Product before use if the battery
leaks.
● For use by competent persons. Anyone
using this Product should be knowledgeable
and trained about the risks involved with
measuring voltage, especially in an industrial
setting, and the importance of taking safety
precautions and of testing the Product before
and after using it to ensure that it is in good
working condition.
Symbols
These symbols are on the Tester or in this instruction
sheet.
Symbol Explanation

Important information. Consult the
instruction sheet.

Hazardous Voltage.

Suitable for live working.

Conforms to European Union Directives
CAT III Measurement Category III is applicable to
test and measuring circuits connected to
the distribution part of the building’s low-
voltage MAINS installation.
CAT IV Measurement Category IV is applicable
to test and measuring circuits connected
at the source of the building’s low-voltage
MAINS installation.
www.calcert.com sales@calcert.com1.800.544.2843
0
5
10
15
20
25
30

Summary

Safety Information

General Safety Warnings

Essential safety precautions to prevent shock, fire, or personal injury during operation.

Safety Symbols Explained

Explanation of symbols used in the manual for electrical safety and standards compliance.

Quick Reference

Pushbutton Operations

Summary of pushbutton functions like torch, hold, low impedance test, and beeper settings.

Features

Model Feature Comparison

Display Indicators

LED Indicator Functions

LCD Display Details

Safe Operation and Testing

Proper Tester Handling

Instructions on how to hold the tester safely to prevent injury and ensure accurate readings.

Built-in Self-Test Procedure

Detailed steps to perform the self-test to verify tester functionality before and after measurements.

Maintenance and Care

General Maintenance Warnings

Important warnings and precautions for safe maintenance, battery replacement, and cleaning.

Core Measurement Functions

Voltage Measurement

Detailed instructions for performing voltage tests using LED and LCD indicators.

Continuity and Diode Testing

Environmental and Safety Compliance

Safety Standards and Categories

Details compliance with EN61243-3:2014, overvoltage protection, and measurement categories.

Maintenance and Calibration

Calibration Interval

Battery Replacement Guide

Detailed procedure for replacing batteries to ensure proper tester function.

Fluke T130 Specifications

General

Housing color	Black, Grey, Red, Yellow
Maximum voltage	- V
AC current range	- A
Battery type	AAA

Weight and Dimensions

Depth	38 mm
Width	70 mm
Height	260 mm
Weight	280 g