Need help?Do you have a question about the Fluke TS54 TDR and is the answer not in the manual?
General| Brand | Fluke |
|---|---|
| Model | TS54 TDR |
| Category | Measuring Instruments |
| Language | English |
Register your product with Fluke Networks for updates and support services.
Understand the IEC symbols and safety warnings for proper test set operation.
Describes the test set housing made of high-impact plastic for rugged service.
Details the spring-loaded belt clip for secure connection to belt loops.
Information on field-replaceable test leads and available configurations.
Instructions on battery usage, replacement, and handling warnings.
Location and usage of the speaker and microphone for audio output.
Explains Monitor mode for line monitoring and Talk mode for off-hook operations.
Details on using Monitor mode for line monitoring without disrupting service.
How Caller ID information is displayed after the first ring.
Functionality of Caller ID for incoming calls during an active call.
Describes the lockout condition when voltage is 4 V or less.
Step-by-step guide to making a call using the test set.
Methods for ending an active call.
Process for answering an incoming call on the test set.
Guidelines for monitoring lines and avoiding disruption to data services.
Procedure for activating idle, ground-start telephone lines.
Explains lockout for voltages above 140 V dc for safety.
How to store and manage phone numbers for speed dialing.
How to insert pauses into stored numbers for dialing through PBX systems.
Steps to dial a number using the speed dial feature.
How to select and dial numbers from the phone book.
Instructions to redial numbers from the call history.
Capturing DTMF tones for troubleshooting customer equipment.
How to use the Time Domain Reflectometer to measure cable length and faults.
Test for data and voltage on a line before TDR testing.
Velocity of Propagation setting for accurate TDR length calculations.
Guidance on using the TDR with multi-conductor cables.
How to use the toner to identify wire pairs and find cables.
Setting the dialing mode to tone or pulse.
Adjusting hook flash duration for PBX functions.
Setting the duration of pauses inserted into stored numbers.
Configuring the test set to default to receive-only speaker mode.
Setting the inactivity timer for automatic test set shutdown.
Setting the VOP for accurate TDR length calculations.
Explains the principles and operation of Time Domain Reflectometry.
Step-by-step guide for safely replacing the test set battery.
Instructions for replacing the protective cover for the belt clip.
Technical specifications for the TS54 TDR/TS53 PRO test sets.
To Next Page
