10
TS54TDR/TS53 PRO Test Sets
Users Guide
M
The M key lets you access these phone numbers, settings, and tests:
•
Call PhnBk: A phonebook of nine stored numbers for the speed dialing function. See
"Dialing and Storing Numbers in Memory" on page 14, "Program Speed Dialing Numbers"
on page 15, and "Dialing a Number with the Speed Dial Function" on page 16.
The number in memory location 9 is the numbers for the ANAC function. See "Visual ANAC
Mode" on page 17.
•
Call Log: A list of phone numbers for the last 10 calls that the test set made or received. See
"Dialing a Number from the Call Log" on page 16.
•
Digit Grab: Shows you the digits dialed by another device. See "DTMF Digit Grabbing" on
page 16.
•
SmartTone: Lets you use an inductive probe to find telephone lines. See "Using the Toner
(TS54 TDR)" on page 19.
•
Edit PhnBk: Lets you edit numbers in the phonebook. See "Program Speed Dialing
Numbers" on page 15.
•
TDR (TS54 TDR): Lets you change the Line Verification and VOP settings for the TDR. See
"Line Verification" on page 18 and "VOP" on page 18.
•
Settings: Lets you change settings for the backlight timeout (page 23), handset and
speaker volume (page 24), tone/pulse mode (page 22), pause duration (page 22), flash
duration (page 22), default mode for the speakerphone (page 22), and the test set timeout
(page 23). You can also reset the test set to factory defaults (page 25).
Table 2. Keys (continued)
To Next Page
Loading...
