Fluke T150 - User Manual

To Next Page

T90/T110/T130/T150

Voltage/Continuity Tester

Instruction Sheet

Introduction

The Fluke T90/T110/T130/T150 Electrical Testers (the

Tester or Product) are voltage and continuity testers

with a rotary eld indication (T110/T130/T150 only).

Their primary use is for test and measurement in

industrial, commercial, and household environments.

This Product complies with the most recent safety

standards for safe, reliable test and measurement.

The xed test probe cover prevents the risk of injury

when you move the instrument.

How to Contact Fluke

To contact Fluke, call one of the following telephone

numbers:

• Germany: 07684 - 80 09 545

• France: 01 48 17 37 37

• United Kingdom: +44-0-1603256600

Go to www.uke.com to register your product,

download manuals, and nd more information.

To view, print, or download the latest manual

supplement, visit http://us.uke.com/usen/support/

manuals.

Safety Information

 Warning

To prevent possible electrical shock, re, or

personal injury:

● Read all safety Information before you use the

Product.

● Use the Product only as specied, or the

protection supplied by the Product can be

compromised.

● Measure a known voltage rst to make sure

that the Product operates correctly.

● Do not apply more than the rated voltage,

between the terminals or between each

terminal and earth ground.

PN 3928132

● Limit operation to the specied measurement

category or voltage ratings.

● Do not work alone.

● Comply with local and national safety codes.

Use personal protective equipment (approved

rubber gloves, face protection, and ame-

resistant clothes) to prevent shock and arc

blast injury where hazardous live conductors

are exposed.

● Do not use the Product around explosive gas,

vapor, or in damp or wet environments.

● Do not use and disable the Product if it is

damaged.

● Do not use the Product if it operates

incorrectly.

● Keep ngers behind the nger guards on the

probes.

● Do not use the Product if the test leads are

damaged.

● Examine the case before you use the Product.

Look for cracks or missing plastic.

● The battery door must be closed and fastened

before you operate the Product.

● Replace the batteries when the low battery

indicator shows to prevent incorrect

measurements.

● Repair the Product before use if the battery

leaks.

● For use by competent persons. Anyone

using this Product should be knowledgeable

and trained about the risks involved with

measuring voltage, especially in an industrial

setting, and the importance of taking safety

precautions and of testing the Product before

and after using it to ensure that it is in good

working condition.

Symbols

These symbols are on the Tester or in this instruction

sheet.

Symbol Explanation



Important information. Consult the

instruction sheet.



Hazardous Voltage.



Suitable for live working.



Conforms to European Union Directives

CAT III Measurement Category III is applicable to

test and measuring circuits connected to

the distribution part of the building’s low-

voltage MAINS installation.

CAT IV Measurement Category IV is applicable

to test and measuring circuits connected

at the source of the building’s low-voltage

MAINS installation.

www.calcert.com sales@calcert.com1.800.544.2843

Main Page

Need help?

Do you have a question about the Fluke T150 and is the answer not in the manual?

Summary

Introduction and Safety Information

General Safety Warnings

Essential safety precautions to prevent shock, fire, or personal injury during operation.

Symbols Explanation

Defines symbols used in the instruction sheet for important information and safety.

Product Features and Specifications

Product Features Overview

Detailed Specifications

Comprehensive technical specifications for voltage range, resolution, continuity, and more.

Tester Operation and Functions

Built-in Self-Test Procedure

Steps to perform a self-test before and after use to ensure proper functionality.

Voltage Testing

Procedure for measuring AC and DC voltage levels using LED bargraph and LCD.

Specialized Voltage Tests

Continuity and Diode Testing

Procedure for performing continuity checks and diode tests on components.

Resistance Measurement

Rotary Field Indication

Maintenance and Care

General Maintenance Warnings

Important warnings regarding maintenance, chemical exposure, and technician repair.

Calibration Recommendation

Battery Replacement Procedure

Step-by-step guide to replacing the batteries, including self-test after replacement.