1
Introduction
The Fluke TiS Thermal Imaging Scanner (hereafter “the Imager”) produces
infrared images on a 640 X 480 display. Thermal images are displayed on the
Imager LCD and can be saved to an SD Memory card. Transferring images to
a PC is accomplished by removing the SD memory card and connecting it to a
PC through the included card reader. SmartView
®
software is included for
image analysis and report generation from these saved images.
The thermal image temperature range starts at -20 °C, and goes up to +100 °C.
The thermal image can be displayed using any one of a number of color
palettes.
Imager power is supplied by a rechargeable Nickel Metal-Hydride battery.
A full visual image (640 X 480) can be displayed and stored with each IR
image. The Imager operates in full-time thermal image mode only.
To contact Fluke, call one of the following telephone numbers:
• USA: 1-800-760-4523
• Canada: 1-800-36-FLUKE (1-800-363-5853)
• Europe: +31 402-675-200
• Japan: +81-3-3434-0181
• Singapore: +65-738-5655
• Anywhere in the world: +1-425-446-5500
Or, visit Fluke's website at www.fluke.com
.
To register your product, visit http://register.fluke.com
.
To view, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals
.
To Next Page
Loading...
